Weight sensor:USB connect weight sensor
Format
![](http://tech-try.com/wp/wp-content/uploads/2018/11/kata-ltc.gif)
(A)
・Rated weight
010 =100N(≒10kg)
100 =1000N(≒100Kgf) *1N≒0.102kgf
・Sharp L → Square type
(B)External dimensions
(e.g.)200 = One Side 200mm
(C)Specification number
Special specification number for each customer
![](https://www.tech-try.com/en/wp-content/uploads/2018/11/usb.jpg)
Electronic balances are highly accurate, lightweight, and suitable for measuring masses with a ratin
TTS series, and LTS series are manufactured to the desired specifications, so tapping holes for fixi
You can tare from the amplifier display. For the MX-11 series, if you press and hold the leftmost ZE
The weight sensor is said to be able to apply a load of 100,000 times. Although it has a very long l
There may be a problem with the load cell of the internal element. If a load exceeding the rated wei
Please refer to the troubleshooting in the specifications or contact our staff. Frequently asked que
Our weight sensor and load cell use a strain gauge for measurement. The resistance foil is attached
Due to its intended use, weight sensors are often used in clean rooms or indoors. The temperature ra
Although it depends on the sensor accuracy, the shape of the sensor sinks up to several mm when a ra
The output of the weight sensor is a weak voltage of several mV / V. Since it is necessary to amplif
The output from our weight sensor and load cell is several mv / v (at rated time). By using it as a