Leakage sensor Screw type Leakage sensor

Format

AZV-F Series

Specification

Format AZV-F Series
Detection output

Open when detected (B contact operation)
OPEN collector output (load current 50mA or less)
Detection method

Infrared reflective photo reflector

Detection surface

3mm or less from the tip of the sensor
Input voltage

DC12-24V person 10%

Current consumption

20mA or less

Operating temperature

-10-50 ° C
Weight

Approximately 20g (excluding cable)

Material

PFA

Cable

Φ2.3 AWG28 3 cores (sheath FEP)
Brown: Power input
Black: Output
Blue: Common power signal GND
Cable length … 2m

-Install the sensor in a place where there are no reflective objects.
-Do not install an adapter etc. on the detector.
-Do not apply stress to the sensor.
・ Do not use in places exposed to external light.
・ Do not use near noise sources.

　
　
　
　
　
　
　
　
　
　
　
　
　

Is it possible to change the cable length of the leak sensor? 36640 views

The standard cable length for the leak sensor is 2M. The cable length can be changed, so please cont

Please tell me about the detection principle of the leak sensor. 36513 views

This is an optical sensor that uses an infrared reflective photo reflector. Infrared rays are projec

Can it be used to detect chemical leaks? 59401 views

Yes, you can. There are two types of leak sensor materials: P / P (made of polypropylene) and Teflon

I want to install it in a place with vibration, is that okay? 36385 views

The TFP-T series has a lock type to prevent it from coming off the installation holder. It is a spec

I don’t know which leak sensor to choose. 58688 views

A guideline for selecting a leak sensor. (1) Material made of Teflon → TFP-T series, TFP-F series Ma

Do I need to purchase the leak sensor holder separately? 58707 views

The standard holder is delivered with one installed for each leak sensor body, so there is no need t

Is it possible to manufacture with the specifications for our company? 58735 views

Yes, we can also manufacture custom products. We will ask you for your desired specifications and ma

Do I need a holder for the leak sensor? 58704 views

Yes, a holder for the leak sensor is required for the following three reasons. (1) To protect the de